[ TPS® PC物性表 ]
優異的抗衝擊性
聚碳酸酯(PC)是工程塑膠中唯一透明的無定形樹脂,具有突出的抗衝擊性能,可在較寬的溫度範圍內使用。它還具有優異的蠕變性能和低吸水率,因此具有優異的尺寸穩定性。雖然它具有非常好的電氣性能,但耐化學性差,容易產生應力裂紋,所以必須小心。
▌PC 物性表比較
特性 Properties |
測試方法 Test Method |
單位 Unit |
PC (NC-I) |
PC (BK) |
PC G20 |
物理性質 Physical Properties | |||||
比重 Specific Gravity (23°C) |
ASTM D-792 |
--- | 1.20 | 1.20 | 1.33 |
吸水率 Water absorption (23°C, 24 Hrs) |
ASTM D-570 |
% | 0.2 | 0.2 | 0.11 |
線膨脹係數 Linear expansion coefficient |
JIS K7197 |
×10 -5 /℃ |
7.0 | 7.0 | 3.4-5.0 |
熱傳導 Thermal conduction | E 1530 | W/mK | -- | -- | -- |
可燃性 Flammability (UL) | D570 | --- |
V-2 (0.40mm) |
V-2 (0.40mm) |
HB equivalent |
機械性質 Mechanical Properties | |||||
抗拉強度 Tensile strength |
ASTM D-638 |
MPa | 61 | 61 | 76 |
拉伸彈性 Tensile elasticity |
ASTM D-638 |
% | 140.0 | 140.0 | 4.0 |
彎曲彈性率 Flexural Modulus |
ASTM D-790 |
GPa | 2.23 | 2.23 | 5.03 |
彎曲強度 Flexural Strength |
ASTM D-790 |
MPa | 90 | 90 | 127 |
蒲松氏比 Poisson's ratio | -- | --- | 0.38 | 0.38 | 0.36 |
抗壓強度 Compressive strength |
ASTM D-695 |
MPa | 76 | 76 | -- |
缺口衝擊強度 Izod Notched Impact Strength |
ASTM D-256 |
J/M | 880.0 | 880.0 | 49.0 |
洛氏硬度 Rockwell hardness |
ASTM D-785 |
--- | R124 | R124 | R124 |
熱性質 Thermal Properties | |||||
載重撓曲溫度 Deflection temperature under load (1.82 MPa) |
ASTM D-648 |
℃ | 133 | 133 | 138 |
連續使用溫度 Continuous use temperature | -- | ℃ | 115 | 115 | -- |
玻璃化轉變溫度 Glass transition temperature | -- | ℃ | -- | -- | -- |
熔點 Melting point | -- | ℃ | -- | -- | -- |
電氣性能 Flammability | |||||
介電強度 Dielectric strength |
ASTM D-149 |
MV/m | 30.0 | 30.0 | -- |
表面電阻 Surface resistance |
ASTM D-257 |
Ω | -- | -- | -- |
體積電阻 Volume resistance |
ASTM D-257 |
Ω・cm | 10¹⁶ | 10¹⁶ | -- |
介電常數 Permittivity 106Hz |
ASTM D-150 |
--- | 2.9 | 2.9 | -- |
介電正切 Dielectric tangent 106Hz |
ASTM D-150 |
--- | 0.009 | 0.009 | -- |
TORAY 東麗其他系列產品